Performance features:

1. Test channel / station: 6 stations (according to customer requirements);

2. Main control system: PLC (Mitsubishi), display system: 12 inch human-computer interface (Mitsubishi) - Chinese / English interface display: a test result (total power on time and average power on time), B test condition (test times, test voltage, test current, etc.) and test failure form (no current for a long time, current for a long time, water shortage or excess, leakage, steam on) C sets test parameters (test times, power on detection time, power off detection time, steam switch reset time after power off, water flow);

3. Power system: pneumatic (SMC product) + motor (imported motor) transmission, automatic simulation of hand water pouring;

4. Frame: aluminum alloy profile, durable, stable, beautiful, stainless steel sealing plate;

5. Water adding system: automatically add water and detect the water level. If it is not within the specification range, there will be an audible and visual alarm. The flowmeter and pressure regulating valve are imported products (hard water function is added for reserve);

6. Drainage system: funnel is used, and stainless steel threaded pipe is used for drainage pipe, which can adjust the horizontal angle and up and down position arbitrarily;

7. Detection system: current detector "CW", voltage detector "CW", displacement sensor "KEYENCE" (detection of steam switch reset), flow detector USA "Ferguson" and other components are all imported components;

8. Alarm system: audible and visual alarm, yellow light in the test process, red light in case of fault, the whole test is completed and passes the green light;

9. Power supply system: the test station controls 240V / 230V / 120V separately, 50Hz / 60Hz power supply can be selected, and the corresponding frequency conversion power supply is configured;

10. Air supply system: equipped with SMC filter and pressure gauge;

11. Cooling system: compressed air cooling (two modes can be selected to enable or disable);

12. Fixture: 13 sets, suitable for 13 water cookers proposed by otter, easy to install and easy to disassemble.

It can be customized according to customers' products.